Hurtworld Server HostingHurtworld Server Hosting
A Hurtworld server built for raid nights: Oxide/uMod plugins, persistent admin setup in autoexec.cfg and low latency from İstanbul.
Choose your Game Server
Select from our wide range of optimized game servers. Each server is configured for maximum performance and comes with DDoS protection.
1. Plan Type
2. Location
3. Choose Plan
Silver 6GB
Gold 8GB
Platinum 10GB
Diamond 12GB
Emerald 16GB
Xtreme 32GB
Which Hurtworld Plan Is Right for You?
Compare recommended use, plan hardware and monthly prices.
| Plan | Recommended for | Hardware | Monthly price |
|---|---|---|---|
| Silver 6GB | 10–20 players, vanillaRecommended entry tier; enough for a small to mid-sized community without plugins. | 4 vCore Ryzen 9950X · 6 GB DDR5 6000MHz · 60 GB NVMe SSD Samsung 990 PRO | ₺345.00/mo |
| Gold 8GB | 20–35 players, a few pluginsExtra memory for light Oxide plugins and the base density that builds up late in a wipe. | 4 vCore Ryzen 9950X · 8 GB DDR5 6000MHz · 70 GB NVMe SSD Samsung 990 PRO | ₺440.00/mo |
| Platinum 10GB | 35–50 players, modded PvPBalanced memory and disk for data-heavy plugins and crowded raid hours. | 4 vCore Ryzen 9950X · 10 GB DDR5 6000MHz · 100 GB NVMe SSD Samsung 990 PRO | ₺530.00/mo |
| Diamond 12GB | 50–70 players, dense mapPrevents memory pressure during long wipes when the map is packed with bases. | 4 vCore Ryzen 9950X · 12 GB DDR5 6000MHz · 110 GB NVMe SSD Samsung 990 PRO | ₺617.50/mo |
| Emerald 16GB | 70–100 players, heavy plugins6 vCores give room for large plugin stacks and several raids at once. | 6 vCore Ryzen 9950X · 16 GB DDR5 6000MHz · 120 GB NVMe SSD Samsung 990 PRO | ₺840.00/mo |
| Xtreme 32GB | 100+ players, large communityMore than most Hurtworld servers need; meant for very busy, plugin-heavy projects. | 12 vCore Ryzen 9950X · 32 GB DDR5 6000MHz · 200 GB NVMe SSD Samsung 990 PRO | ₺1520.00/mo |
Why TheCrewHost for Hurtworld?
The real workload of running Hurtworld: launch commands, plugins, wipes and staying up through raid night.
C# Plugins with Oxide/uMod
Once Oxide is extracted over the server files, plugins go in oxide/plugins and their settings in oxide/config, uploaded and edited through SFTP or the file manager.
Persistent Settings in autoexec.cfg
Put servername, maxplayers and addadmin in autoexec.cfg and they run on every boot, so admin rights no longer vanish after a restart.
Safe Backups Before Every Wipe
Take a panel backup and download the save before wipe day, then start fresh; rolling back a wipe that went sideways only takes a few minutes.
Single-Thread Speed for Unity
Hurtworld's server logic runs largely on one main thread, and the Ryzen 9 9950X's high clocks keep the server frame rate steady during crowded raids.
DDoS Protection for Competitive PvP
Attacks aimed at knocking the server offline during a raid are filtered by free DDoS protection, so fights are decided by players, not packet floods.
Fast Saves on NVMe
Samsung 990 EVO Plus NVMe drives write world saves and plugin data quickly, cutting save hitches on maps crowded with Ownership Stakes and bases.
Hurtworld server hosting at TheCrewHost starts at $8.63 per month (₺345.00) with Silver 6GB, a 24/7 dedicated server running on a Ryzen 9 9950X with DDR5 memory and NVMe storage. It sits in İstanbul, so players connecting from Türkiye and nearby regions are not losing gunfights or raids to lag. You can lock in the server name, player cap and admins through autoexec.cfg, and install the Oxide/uMod framework to add C# plugins for things like kits, teleports or chat moderation. Wipe schedules are yours too: download a backup, reset the world and start the next season on your terms.
Why run your own Hurtworld server?
Hurtworld is Bankroll Studios' Unity-built survival game centered on unforgiving PvP and a raid-driven loop, and community servers are what keep it alive. Vanilla servers with stock balance, fast-paced PvP servers with kits and teleports added through Oxide, and calmer community servers that restrict raiding all coexist in the server list.
On your own Hurtworld server you control the wipe rhythm, the player cap and the rules. Players claim territory with Ownership Stakes, build bases, roam the map in vehicles and raid rival compounds. For that loop to feel fair, the server has to stay smooth even mid-raid; on weak hardware a big raid means rubber-banding and lag for everyone involved.
A dedicated server runs around the clock regardless of anyone's home PC, which suits Hurtworld perfectly. Raids tend to happen while you sleep, and the world needs to be running when they do.
How much RAM and CPU does a Hurtworld server need?
We recommend 6 GB of RAM as the starting point, and a vanilla server with 10 to 20 players runs comfortably on Silver 6GB. Besides player count, memory grows with how built-up the map gets and with the plugins you add: every Ownership Stake, wall piece and storage box is another object the server keeps in memory, and data-heavy plugins add to that.
If you run a handful of Oxide plugins with 20 to 35 players, Gold 8GB is the right step. A plugin-heavy PvP server with 35 to 50 players fits Platinum 10GB. For communities above 50 players where the map fills with bases late in the wipe, Diamond 12GB or Emerald 16GB with 6 vCores stays balanced until the season ends.
On the CPU side, the Unity-based Hurtworld server handles most game logic on a single main thread. Per-core speed therefore matters more than core count, and the Ryzen 9 9950X makes a real difference when several raids are happening at once. The 60 GB and larger NVMe allocations are plenty for the server files and pre-wipe backups.
How do you install Oxide/uMod plugins?
Hurtworld is one of the games supported by Oxide, now known as uMod. When you download the Hurtworld build of Oxide and extract it over the server files, an oxide directory appears in the server folder. C# plugin files go into oxide/plugins, each plugin generates its config file under oxide/config on first load, and persistent data is stored in oxide/data.
You can upload plugins through the panel file manager or over SFTP. Because Oxide can reload plugins while the server is running, adding a new one usually does not require a shutdown. Permissions are handled by Oxide's permission system: you grant a specific plugin permission to a player or a group, which is how you build VIP or moderator groups.
The thing to watch is version compatibility. When Hurtworld updates, you need a matching Oxide build, or plugins may fail to load. After a game patch, update the server first, then Oxide, and check the console for plugin errors before opening the doors again.
Launch commands, autoexec.cfg and admins
The Hurtworld dedicated server runs headless with the -batchmode and -nographics parameters, and it is configured with the game's own console commands. host sets the game port, queryport the query port, servername the name shown in the list and maxplayers the player cap. The official defaults are ports 12871 and 12881, but on TheCrewHost the ports assigned to your server in the panel are the ones that apply.
Rather than passing these commands on every launch, the cleanest approach is to add them to autoexec.cfg in the server folder, where each line runs in order at startup. This matters most for admins: addadmin on its own only lasts for the current session, so admin rights disappear when the server restarts. Put the addadmin line with your SteamID64 into autoexec.cfg and your rights become permanent.
After making changes, restart the server from the panel and check the console output to confirm every command ran cleanly. A typo in any line means that command simply does not take effect, so reading the startup log should become a habit.
How do you plan wipes and get players connected?
Hurtworld community servers usually run on regular wipes: the map resets and everyone starts again on equal footing. Pick a rhythm that fits your players; heavy PvP servers tend to wipe more often, while calmer build-focused servers wipe less frequently. Before every wipe, take a backup from the panel and download the save files to your own machine so you can roll back if something goes wrong. If you are not sure which files to clear, our support team can walk you through it.
Players join by searching Hurtworld's in-game server list for the name you set with servername. Keep it short and distinctive; adding the wipe day or server style to the end of the name helps you stand out. The server IP and port are listed in the panel, and pinning them in your community Discord saves a lot of repeated questions.
If the server does not show up in the list, double-check the query port setting and confirm in the console that startup finished.
How to Set Up a Hurtworld Server
- 1
Choose a plan for your target population
Silver 6GB handles a vanilla server with 10 to 20 players; start on Gold or Platinum if you are planning a busier PvP server with Oxide plugins.
- 2
Complete payment and let setup run
Once payment is confirmed, the Hurtworld server files install automatically and your server appears in the gamepanel.hostingmerkezi.net control panel.
- 3
Prepare autoexec.cfg
Open autoexec.cfg in the file manager and add servername, maxplayers and an addadmin line with your SteamID64 so the settings survive every restart.
- 4
Install Oxide/uMod if you want plugins
Upload the Hurtworld build of Oxide over the server files, restart, and confirm that the oxide folder has been created.
- 5
Add plugins and set permissions
Drop C# plugin files into oxide/plugins, adjust their settings under oxide/config and create groups with Oxide's permission system.
- 6
Announce the server and point players to the list
Share the server name and wipe schedule with your community; players search for the name in the in-game server list and connect.
Frequently Asked Questions
What people ask about pricing, hardware, Oxide plugins and wipes before renting a Hurtworld server.
How much does Hurtworld server hosting cost?
How much RAM does Hurtworld need?
Do Oxide/uMod plugins work?
Why do my admin rights disappear after a restart?
How soon will my server be ready?
How do players connect to my Hurtworld server?
How do I wipe the server?
Are backups automatic?
Is DDoS protection included?
Can I upgrade if my server grows?
İstanbul Location,
Maximum Performance
Our İstanbul datacenter runs on Ryzen 9 hardware, delivering low latency to players in Türkiye and good connectivity to Europe, the Middle East and the Caucasus.
Turkey
İstanbul
Turkey
Explore Our Other Services
Everything your project needs — from game servers to VPS, dedicated servers, web hosting and Discord bot hosting.
Connect with our community of gamers and developers
Get instant support, share experiences, and stay updated with the latest news
